在網上發現有人做一個設備，用spartan-6做的，叫Milkymist one ，這個真的很強大啊，說明FPGA的應用領域可以很廣！以下是原創者的介紹：

Milkymist one 包括了一個計算機所有的東西。我總是在幻想將來 Milkymist one 會成為一個功能十分強大的設備。 MilkyMist one 有一個特點。沒有CPU。有的只是一塊FPGA。你可以把你想要的東西寫到這個FPGA里。讓它變成你想要的設備?，F(xiàn)在 Milkymist one 更像一個 VJ station. 運行著LM32，操作系統是 RTEMS. 程序叫做 FlickerNoise.

The Milkymist One is an open hardware product that concentrates all the processing power and the interfaces of an heavily interactive VJ setup into one small box. With a unique combination of built-in interfaces such as MIDI, DMX512, analogue video input, Ethernet, OpenSoundControl and generic digital I/O, it gives you all the tools to create truly interactive performances.

With the Milkymist SoC, the project pushes the frontiers of open source further. While many open hardware projects are based on a proprietary and closed processor, at the core of the Milkymist One lies a custom embedded processor whose Verilog HDL design files are entirely free and open source.

All of this would never be usable by everybody without user-friendly VJ software optimized for running on the system. Inspired by the popular MilkDrop visualization plug-in for Winamp, Flickernoise provides a graphical tool that allows you to create, set-up and run the visual performances.

The Milkymist One will be a turnkey interactive VJ station. Before the software is ready for this more general public usage, we sell developer kits to pioneers who can stand a few software problems and embedded devices enthusiasts who would enjoy developing on this open source platform. Thanks to the extreme flexibility of the FPGA, many uses can be imagined.

Milkymist One
Manufacturing is carried out by Sharism at Work Ltd..

特點:
- Multi-standard video input (PAL/SECAM/NTSC)
- Two DMX512 (RS485) ports
- MIDI IN and MIDI OUT ports
- VGA output, 24bpp, up to 140MHz pixel clock (> 1024x768)
- AC'97 audio
- XC6SLX45 Spartan-6 FPGA supporting the open source Milkymist SoC
- 128MB 32-bit DDR400 SDRAM
- 32MB parallel flash
- 10/100 Ethernet
- Memory card
- Two USB host connectors
- RC5-compatible infrared receiver
- RS232 debug port

The board photos are © Copyright 2010 Adam Wang, and the case photos © Copyright 2010 Joachim Steiger. They are released under the Creative Commons Attribution-Share Alike 3.0 Unported license.

RC2 board
- RC2 design files (Altium Designer)
- RC2 Gerber plots
- RC2 schematics (PDF)
- Changes from RC1

RC1 board (outdated)
- RC1 design files (Altium Designer)
- RC1 Gerber plots
- RC1 schematics (PDF)

All the board design files are © Copyright 2009-2010 Sébastien Bourdeauducq and Adam Wang, and are released under the Creative Commons Attribution-Share Alike 3.0 Unported license. Commercial use within the terms of the license is encouraged.

Steampunk DIY case
Thanks Joachim Steiger from Raumfahrtagentur for this DIY case design, that you can reproduce yourself with a laser cutter.
(more photos: 1 2 3)
You can download the DXF design files here. They are licensed under Creative Commons BY-SA 3.0 Unported. There is some room for improvement in this design; it's currently missing a hole for the internal microphone and labels on top of the different connectors.

3_201103302040421YtNb

3_201103302038181beBv

3_201103302038181beBv

3_201103302038181beBv