手冊中注意幾個地方：

RTC_SetAlarm() :The Alarm register can only be written when the corresponding Alarm is disabled (Use the RTC_AlarmCmd(DISABLE)).

All RTC interrupts are connected to the EXTI controller.

Configure and enable the EXTI Line 17 in interrupt mode and select the rising edge sensitivity using the EXTI_Init() function.

=========

void RTC_Config(void)
{
RTC_InitTypeDef RTC_InitStructure;
RTC_TimeTypeDef RTC_TimeStructure;
RTC_DateTypeDef RTC_DateStructure;
RTC_AlarmTypeDef RTC_AlarmStructure;
EXTI_InitTypeDef EXTI_InitStructure;

PWR_BackupAccessCmd(ENABLE);//打開配置寄存器權限
RCC_HSEConfig(RCC_HSE_ON);
while(RCC_GetFlagStatus(RCC_FLAG_HSERDY)==RESET);//等待時鐘穩定
RCC_RTCCLKConfig((RCC_RTCCLKSource_HSE_Div31));//時鐘分頻
RCC_RTCCLKCmd(ENABLE);//使能RTC時鐘

if(RTC_ReadBackupRegister(RTC_BKP_DR0)!=0x9527)//一個標志，看是否已經配置過RTC
{
RTC_WriteProtectionCmd(DISABLE);

RTC_EnterInitMode();
RTC_InitStructure.RTC_HourFormat=RTC_HourFormat_24;
RTC_InitStructure.RTC_AsynchPrediv=0x7D-1;//有兩次分頻。小于0x7F
RTC_InitStructure.RTC_SynchPrediv=0x811-1;//小于0x7FFF
RTC_Init(&RTC_InitStructure);

RTC_TimeStructure.RTC_Seconds = 0x00;
RTC_TimeStructure.RTC_Minutes = 0x01;
RTC_TimeStructure.RTC_Hours = 0x01;
RTC_TimeStructure.RTC_H12 = RTC_H12_AM;
RTC_SetTime(RTC_Format_BCD,&RTC_TimeStructure);//設置初始時間

RTC_DateStructure.RTC_Date = 15;
RTC_DateStructure.RTC_Month = 11;
RTC_DateStructure.RTC_WeekDay= RTC_Weekday_Thursday;
RTC_DateStructure.RTC_Year = 13;
RTC_SetDate(RTC_Format_BCD,&RTC_DateStructure);//設置初始日期

RTC_ExitInitMode();
RTC_WriteBackupRegister(RTC_BKP_DR0,0X9527); //初始化完成，設置標志
RTC_WriteProtectionCmd(ENABLE);
}
PWR_BackupAccessCmd(DISABLE);
RTC_WaitForSynchro();//等待RTC Time and Date 寄存器和RTC APB clock同步完成

PWR_BackupAccessCmd(ENABLE);//打開配置寄存器權限

RTC_AlarmCmd(RTC_Alarm_A,DISABLE);
//設置鬧鐘為 每到第5s則觸發一次
RTC_AlarmStructure.RTC_AlarmTime.RTC_Hours=1;
RTC_AlarmStructure.RTC_AlarmTime.RTC_Minutes=1;
RTC_AlarmStructure.RTC_AlarmTime.RTC_Seconds=5;
RTC_AlarmStructure.RTC_AlarmTime.RTC_H12=RTC_H12_AM;
//RTC_AlarmStructure.RTC_AlarmMask=RTC_AlarmMask_All;//這就會是每秒都觸發一次鬧鐘了
RTC_AlarmStructure.RTC_AlarmMask=RTC_AlarmMask_DateWeekDay|
RTC_AlarmMask_Hours|RTC_AlarmMask_Minutes;

RTC_SetAlarm(RTC_Format_BIN,RTC_Alarm_A,&RTC_AlarmStructure);
RTC_AlarmCmd(RTC_Alarm_A,ENABLE);
RTC_ITConfig(RTC_IT_ALRA,ENABLE);
//中斷優先級設定見nvic.c
PWR_BackupAccessCmd(DISABLE);

//Alarm必須配置EXTI_Line17中斷
EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;//上升沿
EXTI_InitStructure.EXTI_LineCmd = ENABLE;
EXTI_InitStructure.EXTI_Line = EXTI_Line17;
EXTI_Init(&EXTI_InitStructure);
}
void RTC_Alarm_IRQHandler(void)
{
if(RTC_GetFlagStatus(RTC_FLAG_ALRAF)==SET)
{
printf("alarm come rn");
PWR_BackupAccessCmd(ENABLE);//必須有，否則RTC_ClearITPendingBit 不會成功
RTC_ClearITPendingBit(RTC_IT_ALRA);
PWR_BackupAccessCmd(DISABLE);
EXTI_ClearITPendingBit(EXTI_Line17);//注意必須有此句，否則中斷一直被觸發，主循環不被執行了。
}
}

主循環：

while (1)
{
PD12_Toggle;
RTC_GetTime(RTC_Format_BIN,&rtc_time);
RTC_GetDate(RTC_Format_BIN,&rtc_date);
printf("date:20%d-%d-%d ",rtc_date.RTC_Year,rtc_date.RTC_Month,
rtc_date.RTC_Date);
printf("time:%d:%d:%drn",rtc_time.RTC_Hours,rtc_time.RTC_Minutes,
rtc_time.RTC_Seconds);
Delay_ms(1000);
}

運行效果：每到第5s觸發鬧鐘：