在STM32使用外部中斷的基本步驟如下：

1. 設置好相應的時鐘；

2.設置相應的中斷；

3.IO口初始化；

4.把相應的IO口設置為中斷線路（要在設置外部中斷之前）并初始化；

5.在選擇的中斷通道的響應函數中中斷函數。

//配置EXTI 參數

PA0-PF0 共用中斷線源0

PA1-PF1 共用中斷線源1

.............................................

所以不能同時使用PA0和PB0引腳產生外部中斷，（查看官方程序stm32f30x_exti.c文件，下面是節選部分代碼）

===============================================================================
##### EXTI features #####
===============================================================================
[..] External interrupt/event lines are mapped as following:
(#)All available GPIO pins are connected to the 16 external
interrupt/event lines from EXTI0 to EXTI15.
(#) EXTI line 16 is connected to the PVD output
(#) EXTI line 17 is connected to the RTC Alarm event
(#) EXTI line 18 is connected to USB Device wakeup event
(#) EXTI line 19 is connected to the RTC Tamper and TimeStamp events
(#) EXTI line 20 is connected to the RTC wakeup event
(#) EXTI line 21 is connected to the Comparator 1 wakeup event
(#) EXTI line 22 is connected to the Comparator 2 wakeup event
(#) EXTI line 23 is connected to the I2C1 wakeup event
(#) EXTI line 24 is connected to the I2C2 wakeup event
(#) EXTI line 25 is connected to the USART1 wakeup event
(#) EXTI line 26 is connected to the USART2 wakeup event
(#) EXTI line 27 is reserved
(#) EXTI line 28 is connected to the USART3 wakeup event
(#) EXTI line 29 is connected to the Comparator 3 event
(#) EXTI line 30 is connected to the Comparator 4 event
(#) EXTI line 31 is connected to the Comparator 5 event
(#) EXTI line 32 is connected to the Comparator 6 event
(#) EXTI line 33 is connected to the Comparator 7 event
(#) EXTI line 34 is connected for thr UART4 wakeup event
(#) EXTI line 35 is connected for the UART5 wakeup event

/*****************************************************************************/

GPIO_InitTypeDef GPIO_InitStructure;//定義結構體
EXTI_InitTypeDef EXTI_InitStructure;
NVIC_InitTypeDef NVIC_InitStructure;


//outside inteput 引腳配置
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOB, ENABLE);//Enable the GPIOB clock
RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG,ENABLE);//Enable the SYSCFG clock
//打開PB時鐘 配置PB1 引腳為輸入
GPIO_InitStructure.GPIO_Pin=GPIO_Pin_1;
GPIO_InitStructure.GPIO_Mode=GPIO_Mode_IN;
GPIO_InitStructure.GPIO_Speed=GPIO_Speed_50MHz;
//GPIO_InitStructure.GPIO_OType=GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd=GPIO_PuPd_NOPULL;
GPIO_Init(GPIOB,&GPIO_InitStructure);

//配置對應的 GPIO 為EXTI 線
SYSCFG_EXTILineConfig(EXTI_PortSourceGPIOB,EXTI_PinSource1);
//GPIO_EXTILineConfig(GPIO_PortSourceGPIOB，GPIO_PinSource0);

EXTI_InitStructure.EXTI_Line=EXTI_Line1; //中斷線源
EXTI_InitStructure.EXTI_Mode=EXTI_Mode_Interrupt; //中斷
EXTI_InitStructure.EXTI_Trigger=EXTI_Trigger_Rising; //上升沿觸發中斷
EXTI_InitStructure.EXTI_LineCmd=ENABLE;//中斷線使能
EXTI_Init(&EXTI_InitStructure);
NVIC_InitStructure.NVIC_IRQChannel=EXTI1_IRQn;//外部中斷1
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority=2;//搶占優先級 數字越小，優先級越高，優先級高的優先執行。
NVIC_InitStructure.NVIC_IRQChannelSubPriority=15; //響應優先級
NVIC_InitStructure.NVIC_IRQChannelCmd=ENABLE;//使能外部中斷通道
NVIC_Init(&NVIC_InitStructure);//配置NVIC

搶占優先級高的中斷可以打斷搶占優先級低的中斷，這時是不用管響應優先級的；響應優先級只是在兩個或者多個搶占優先級相同的中斷同時到來時進入響應優先級高的中斷，而如果進入這個中斷之后再來一個搶占優先級相同但是響應優先級更高的中斷，則不會打斷已有的中斷。

總之就是搶占優先級不同的時候看搶占優先級級數，先響應搶占優先級高的中斷，而且搶占優先級高的中斷可以打斷搶占優先級低的中斷；當搶占優先級相同的時候看響應優先級級數，先響應響應優先級高的中斷，但是響應優先級高的中斷不可以打斷正在執行的響應優先級低的中斷。

注意： stm32官方給的中斷響應函數（查看文件startup_stm32f30x.s），空函數名（自己編寫函數體），不要自己定義新的中斷響應函數。
DCD WWDG_IRQHandler ; Window WatchDog
DCD PVD_IRQHandler ; PVD through EXTI Line detection
DCD TAMPER_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line0
DCD EXTI1_IRQHandler ; EXTI Line1
DCD EXTI2_TS_IRQHandler ; EXTI Line2 and Touch
DCD EXTI3_IRQHandler ; EXTI Line3
DCD EXTI4_IRQHandler ; EXTI Line4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7