1 #include //包含單片機內部資源預定義

2 #include

3

4 unsigned char const sin_32[]={104,109,114,119,124,128,133,137,142,146,150,154,157,161,164,//15

5 167,169,172,174,176,177,178,179,180,180,180,180,179,178,176,175,173,171,168,165,//20

6 162,159,156,152,148,144,140,135,131,126,121,116,111,106,101,96,91,86,81,76,72,67,63,//23

7 58,54,50,46,43,39,36,33,31,28,26,24,23,22,21,20,20,20,20,21,22,24,25,27,29,32,35,38,//42

8 41,44,48,52,56,60,65,69,74,79,84,89,94,99

9 };//浮點型精度高，換其他會出現尖角

10

11 void work0();

12 unsigned char set_pwm;

13 void main(void)

14 {

15 work0();

16 while(1)

17 {

18 }

19 }

20

21 void work0()//m=0.8;T=(PR2+1)*4*f*TIMR2分頻

22 {

23 //CCPR1L=0X00;//設置CCP1,0%的脈寬輸出

24 TRISC=0X00;//PORTC are outputs

25 CCP1CON=0x0C;//0000 1100，設置CCP1為PWM工作方式，且工作循環位的低兩位為00

26 PR2=199;//設置PWM周期:(PR2+1)*4*Tosc*(TMR2預分頻數1)=200u(5k)

27 T2CON=0x04;//Tc賦值=T*D=(PR2+1)*D=200*D

28 CCP1IE=1;

29 INTCON=0xC0;//GIE=1,開總中斷，開啟第一外設中斷外圍功能模塊中斷

30 TMR2IE=1;TMR2IF=0;

31 }

32

33 //interrupt//

34 void interrupt pic(void)

35 {

36 if(TMR2IF&TMR2IE)

37 {

38 set_pwm++;

39 TMR2IF=0;CCP1IF=0;

40 CCPR1L=sin_32[set_pwm];

41 if(set_pwm==99) set_pwm=0;

42 }

43 }