下面是用普通C51實現的I2C基本電平模擬函數和通用函數。

/*電平模擬函數和基本讀寫函數
void IIC_Start(void);
void IIC_Stop(void);
void SEND_0(void);
void SEND_1(void);
bit Check_Acknowledge(void);
void Write_Byte(uchar b)reentrant;
bit Write_N_Bytes(uchar *buffer,uchar n)reentrant;
bit Read_N_Bytes(uchar SlaveAdr,uchar n,uchar *buffer);
uchar Read_Byte(void)reentrant;
*/

#include
#include
#include
#include"aiic_51.h"

sbit SCL=P1^6;
sbit SDA=P1^7;

void DELAY(uint t)
{
while(t!=0)
t--;
}

void IIC_Start(void)
{
//啟動I2C總線的函數，當SCL為高電平時使SDA產生一個負跳變
SDA=1;
SCL=1;
DELAY(DELAY_TIME);
SDA=0;
DELAY(DELAY_TIME);
SCL=0;
DELAY(DELAY_TIME);
}

void IIC_Stop(void)
{
//終止I2C總線，當SCL為高電平時使SDA產生一個正跳變
SDA=0;
SCL=1;
DELAY(DELAY_TIME);
SDA=1;
DELAY(DELAY_TIME);
SCL=0;
DELAY(DELAY_TIME);
}

void SEND_0(void)
{
//發送0，在SCL為高電平時使SDA信號為低
SDA=0;
SCL=1;
DELAY(DELAY_TIME);
SCL=0;
DELAY(DELAY_TIME);
}

void SEND_1(void)
{
//發送1，在SCL為高電平時使SDA信號為高
SDA=1;
SCL=1;
DELAY(DELAY_TIME);
SCL=0;
DELAY(DELAY_TIME);
}

bit Check_Acknowledge(void)
{
//發送完一個字節后檢驗設備的應答信號
SDA=1;
SCL=1;
DELAY(DELAY_TIME/2);
F0=SDA;
DELAY(DELAY_TIME/2);
SCL=0;
DELAY(DELAY_TIME);
if(F0==1)
return FALSE;
return TRUE;
}

void Write_Byte(uchar b)reentrant
{
//向IIC總線寫一個字節
uchar i;
for(i=0;i<8;i++)
if((b< SEND_1();
else
SEND_0();
}

bit Write_N_Bytes(uchar *buffer,uchar n)reentrant
{
//向I2C總線寫n個字節
uchar i;
IIC_Start();

for(i=0;i {
Write_Byte(buffer);
if(!Check_Acknowledge())
{
IIC_Stop();
return(i==n);
}
}

IIC_Stop();
return TRUE;
}

uchar Read_Byte(void)reentrant
{
//從I2C總線讀一個字節
uchar b=0,i;
for(i=0;i<8;i++)
{
SDA=1; //釋放總線
SCL=1; //接受數據
DELAY(10);
F0=SDA;
DELAY(10);
SCL=0;
if(F0==1)
{
b=b<<1;
b=b|0x01;
}
else
b=b<<1;
}
return b;
}

bit Read_N_Bytes(uchar SlaveAdr,uchar n,uchar *buffer)
{
//從I2C總線讀n個字節
uchar i;
IIC_Start();
Write_Byte(SlaveAdr); //向總線發送接收器地址
if(!Check_Acknowledge()) //等待接收器應答信號
return FALSE;
for(i=0;i {
buffer=Read_Byte();
if(i!=n)
SEND_0(); //發送應答
else
SEND_1(); //發送非應答
}
IIC_Stop();
return TRUE;
}



使用上述代碼，你可以在51上用P1口模擬I2C