/*************************************************************************/
＃include"iom16v.h"
＃include<macros.h>
#definebaud9600//波特率
#definefosc8000000//晶振8mhz
/*************************初始化函數**********************/
voidusart_init(void)
{

/*設置波特率*/
//ubrr=51;
//ubrrh=(unsignedchar)(baud>>8);
//ubrrl=(unsignedchar)(baud);
ubrrl=(fosc/16/baud-1)%256;
ubrrh=(fosc/16/baud-1)/256;
/*接收器和發送器使能*/
ucsrb=(1<<rxen)|(1<<txen);
/*設置數據幀格式*/
ucsrc="/blog/(1<";<ursel)|(1<<usbs)|(3<<ucsz0);//8個數據位，2個停止位
}
/********************數據發送函數（5～8位）*********************/

voidusart_transmit(unsignedchardata)
{
/*等待發送緩沖器為空*/
while(!(ucsra&(1<<udre)))//udre為時緩沖器為空
;
/*將數據放入緩沖器，發送數據*/
udr=data;
}
/********************數據接受函數（5～8位）*********************/
unsignedcharusart_receive(void)
{
/*等待接受數據*/
while(!(ucsra&(1<<rxc)))//接受緩沖器中有未讀出的數據時rxc置位，否則清零
;
/*從緩沖器中獲取并返回數據*/
returnudr;
}
/********************字符串發送函數(不含回車換行)***********************/
voidusart_transmit_string(unsignedchar*s)
{
while(*s)
{
usart_transmit(*s);
s++;
}
}
voidmain()
{
unsignedchari;
unsignedchar*p1,*p2;
unsignedchara[]={"thekeyis："};
unsignedcharb[]={"pleasepressanykey"};
p1=a;
p2=b;
usart_init();
//usart_transmit_string(p2);
//usart_transmit(0x0d);//回車換行
//usart_transmit(0x0a);
while(1)
{
i=usart_receive();
if(i!=0)
{
//usart_transmit_string(p1);
usart_transmit(i);
//usart_transmit(0x0d);//回車換行
//usart_transmit(0x0a);
}

}
}
　　　　/*************************************************************************/
＃include"iom16v.h"
＃include<macros.h>
#definebaud9600//波特率
#definefosc8000000//晶振8mhz
/*************************初始化函數**********************/
voidusart_init(void)
{

/*設置波特率*/
//ubrr=51;
//ubrrh=(unsignedchar)(baud>>8);
//ubrrl=(unsignedchar)(baud);
ubrrl=(fosc/16/baud-1)%256;
ubrrh=(fosc/16/baud-1)/256;
/*接收器和發送器使能*/
ucsrb=(1<<rxen)|(1<<txen);
/*設置數據幀格式*/
ucsrc="/blog/(1<";<ursel)|(1<<usbs)|(3<<ucsz0);//8個數據位，2個停止位
}
/********************數據發送函數（5～8位）*********************/

voidusart_transmit(unsignedchardata)
{
/*等待發送緩沖器為空*/
while(!(ucsra&(1<<udre)))//udre為時緩沖器為空
;
/*將數據放入緩沖器，發送數據*/
udr=data;
}
/********************數據接受函數（5～8位）*********************/
unsignedcharusart_receive(void)
{
/*等待接受數據*/
while(!(ucsra&(1<<rxc)))//接受緩沖器中有未讀出的數據時rxc置位，否則清零
;
/*從緩沖器中獲取并返回數據*/
returnudr;
}
/********************字符串發送函數(不含回車換行)***********************/
voidusart_transmit_string(unsignedchar*s)
{
while(*s)
{
usart_transmit(*s);
s++;
}
}
voidmain()
{
unsignedchari;
unsignedchar*p1,*p2;
unsignedchara[]={"thekeyis："};
unsignedcharb[]={"pleasepressanykey"};
p1=a;
p2=b;
usart_init();
//usart_transmit_string(p2);
//usart_transmit(0x0d);//回車換行
//usart_transmit(0x0a);
while(1)
{
i=usart_receive();
if(i!=0)
{
//usart_transmit_string(p1);
usart_transmit(i);
//usart_transmit(0x0d);//回車換行
//usart_transmit(0x0a);
}

}
}