STM32F429 Discovery FMC驅動原子4.3寸LCD
上一篇寫了GPIO簡單的流水燈測試，看著有點單調，習慣了串口調試，板子上沒有串口 那就另想辦法吧，看著LCD突然有了個想法，為什么不把調試信息輸出到LCD上，以前在做2416 WINCE開發的時候就經常這樣干非常直觀，那說干就干。
STM32F429I-DISO SDK里已經把開發包做好，那就直接拿過來用吧。
#define MESSAGE1 "STM32F429I-Discoverry" //提示信息
#define MESSAGE1_1 " GPIO TEST "
#define MESSAGE2 " LED3 LED4 "
#define MESSAGE2_1 " ^-^ "
#define MESSAGE5 " LED3 = %d" //LED3狀態 1亮 0滅
#define MESSAGE6 " LED4 = %d" //LED4狀態
#define LINENUM 0x15 //行數
#define FONTSIZE Font12x12 //字體大小
定義完了，那就該具體實現了，慣例先初始化 LCD初始化實現：
static void Display_Init(void)
{
/* Initialize the LCD */
LCD_Init();
LCD_LayerInit();
/* Eable the LTDC */
LTDC_Cmd(ENABLE);
/* Set LCD Background Layer */
LCD_SetLayer(LCD_BACKGROUND_LAYER);
/* Clear the Background Layer */
LCD_Clear(LCD_COLOR_WHITE);
/* Configure the transparency for background */
LCD_SetTransparency(0);
/* Set LCD Foreground Layer */
LCD_SetLayer(LCD_FOREGROUND_LAYER);
/* Configure the transparency for foreground */
LCD_SetTransparency(200);
/* Clear the Foreground Layer */
LCD_Clear(LCD_COLOR_WHITE);
/* Set the LCD Back Color and Text Color*/
LCD_SetBackColor(LCD_COLOR_BLUE);
LCD_SetTextColor(LCD_COLOR_WHITE);
/* Set the LCD Text size */
LCD_SetFont(&FONTSIZE);
/* Set the LCD Back Color and Text Color*/
LCD_SetBackColor(LCD_COLOR_BLUE);
LCD_SetTextColor(LCD_COLOR_WHITE);
LCD_DisplayStringLine(LINE(LINENUM), (uint8_t*)MESSAGE1);
LCD_DisplayStringLine(LINE(LINENUM + 1), (uint8_t*)MESSAGE1_1);
LCD_DisplayStringLine(LINE(0x17), (uint8_t*)" ");
/* Set the LCD Text size */
LCD_SetFont(&Font16x24);
LCD_DisplayStringLine(LCD_LINE_0, (uint8_t*)MESSAGE2);
LCD_DisplayStringLine(LCD_LINE_1, (uint8_t*)MESSAGE2_1);
/* Set the LCD Back Color and Text Color*/
LCD_SetBackColor(LCD_COLOR_WHITE);
LCD_SetTextColor(LCD_COLOR_BLUE);
}
初始化完成了，那就改實現顯示函數了
static void Display(void)
{
uint8_t led3 = 0, led4 = 0;
uint8_t aTextBuffer[50];
led3 = GPIO_ReadOutputDataBit(LED3_GPIO_PORT,LED3_PIN); //讀取LED3對應引腳值
sprintf((char*)aTextBuffer, MESSAGE5, led3);
LCD_DisplayStringLine(LCD_LINE_4, (uint8_t*)aTextBuffer); //把LED3狀態更新到屏幕上
led4 = GPIO_ReadOutputDataBit(LED3_GPIO_PORT,LED4_PIN); //讀取LED4對應引腳值
sprintf((char*)aTextBuffer, MESSAGE6, led4);
LCD_DisplayStringLine(LCD_LINE_6, (uint8_t*)aTextBuffer); //把LED4狀態更新到屏幕上
}
這就是顯示函數，讀取LED對應的值，組成字符串，最后更新到LCD，LCD顯示。
接下來就改主函數了：
int main(void)
{
int i;
Display_Init();
LEDInit();
SysTickInit();
while (1)
{
Delay(500);
GPIO_SetBits(LED4_GPIO_PORT,LED4_PIN);
GPIO_ResetBits(LED3_GPIO_PORT,LED3_PIN);
Display();
Delay(500);
GPIO_SetBits(LED3_GPIO_PORT,LED3_PIN);
GPIO_ResetBits(LED4_GPIO_PORT,LED4_PIN);
Display();
}
}
慣例，主要函數部分實現完了，那就看最終的顯示結果吧.
下載文檔
