51單片機洗衣機控制板及C語言程序，該控制板單片機采用AT89C51單片機，所設計全自動洗衣機功能有：標準洗衣、經濟洗衣、單獨洗衣以及排水四種洗衣等四種方式，有強洗、弱洗及運行/暫停、顯示及報警功能,程序利用利用Protues仿真軟件觀察洗衣機的運行狀態和過程。整個設計能達到預想的設計效果。

#include 'reg51.h'

#define uchar unsigned char

#define uint unsigned int

#define Enable(); EA=1;

#define Disable(); EA=0;

#define BIAOZHUN 0

#define JINGJI 1

#define DANDU 2

#define PAISHUI 3

#define QIANGXI 0

#define RUOXI 1

#define T_JinShui 240 //4min*60s

#define T_PaiShui 60 //1min*60s

#define T_XiDi 360 //6min*60s

#define T_PiaoXi_1 240 //4min*60s

#define T_PiaoXi_2 120 //2min*60s

#define T_TuoShui 120 //2min*60s

#define ZHENGZHUAN 0

#define STOP 1

#define FANZHUAN 2

#define ZhengZhuan(); PIN_Motor_A = 0; PIN_Motor_B = 1;

#define Stop(); PIN_Motor_A = 1; PIN_Motor_B = 1;

#define FanZhuan(); PIN_Motor_A = 1; PIN_Motor_B = 0;

#define ZanTing(); ET0 = 0; ET1 = 0; Stop();

#define JiXu(); ET0 = 1; ET1 = 1;

#define flag_Ok (flag_JinShui||flag_PaiShui||flag_XiDi||flag_PiaoXi||flag_TuoShui)

sbit LED_BiaoZhun = P1^0; //標準程序顯示燈

sbit LED_JingJi = P1^1; //經濟程序顯示燈

sbit LED_DanDu = P1^2; //單獨程序顯示燈

sbit LED_PaiShui = P1^3; //排水程序顯示燈

sbit LED_QiangXi = P1^4; //強洗狀態燈

sbit LED_RuoXi = P1^5; //弱洗狀態燈

sbit LED_XiDi = P1^6; //洗滌狀態燈

sbit LED_PiaoXi = P1^7; //漂洗狀態燈

sbit LED_TuoShui = P2^0; //脫水狀態燈

sbit PIN_BaoJing = P2^1; //報警喇叭

sbit PIN_JinShui = P2^2; //進水控制

sbit PIN_PaiShui = P2^3; //排誰控制

sbit PIN_Motor_A = P2^4; //電機腳A

sbit PIN_Motor_B = P2^5; //電機腳B